Full Version: Nodebundle for playing with nodes

Show messages:  1-9  …  1410-1429  1430-1449  1450-1469  1470-1489  1490-1509  1510-1529  1530-1549  …  1850-1859

Thread Split: Some posts in this thread have been moved here

Hi Speedy,

For the center 16 triangles, the centroid point is being found.

The remaining 32, 4 sided closed curves are not planar. This centroid node works for planar polygons.
(The Planar command does not work on the 32, 4 sided closed curves either.)

The center of mass of half of a solid sphere is at 3/8 of the distance from the sphere's center to the hemisphere's pole, as shown by Max's cVolume2.
For a hollow hemisphere, the distance is 1/2.
https://en.wikipedia.org/wiki/Centroid
The centroid node does not work for hemispheres either.

Wolfram gives a formula for center of mass for spherical caps.
Also Wolfram gives a formula for the centroid of a quadrilateral as the midpoint of the line between the midpoints of the diagonals.
Or "The centroid of the vertices of a quadrilateral occurs at the point of intersection of the bimedians."
http://mathworld.wolfram.com/GeometricCentroid.html
(Usually I find Wolfram math difficult to understand, and do not plan on doing integrals:-)
So the centroid for quadrilaterals, (4 line segments forming a closed quad), planar or non-planar, could be easily calculated.

The closed quads could be tested for planarity (somehow), and the calculation added to the centroid node. (I think.)

Is there a MoI method to test for planarity?

- Brian

---

Hi All,

Here's a texture of planar quad facets. It may not look like much, but it is a significant step towards structure that may be fabricated from cnc or laser-cut flat panels from board or sheet material. A multi panel image of node circuitry can be found at: https://www.instagram.com/nodeology/

James



NE folder can be found here:
http://moi3d.com/forum/index.php?webtag=MOI&msg=9358.1

nod file found here (Al made minor revision to my file & posted here):
http://www.mediafire.com/file/56jgl6gvgzg5a0m/Rev-DiaPlanarFaces.zip/file

Image Attachments:
PlanarQuads.jpg 

---

Hi All,

Latest exploration.
A great weekend to all

James
https://www.instagram.com/nodeology/


NE folder can be found here:
http://moi3d.com/forum/index.php?webtag=MOI&msg=9358.1

Attachments:
DiaHex.nod

Image Attachments:
diaHexFlow.jpg 

---

Great things :)

Congrats!!

---

A web search of "dupin cyclide conformal map" brings up interesting papers.
- B

---

Hi All,

Multiple random Point Attractors determine hexagonal Screen hole radii

Have a great weekend,
James
https://www.instagram.com/nodeology/

---

Message 7777.1476 was deleted

---

Hi all Friends
I was a few days holiday, just now ,
I see the latest news in the Forum _

Brian - Thanks for the clarifications regarding the Centroid tool

James - Congratulations on your latest work;
I found a small inaccuracy in determining the reference surface (Flow tool) in your file (DiaPlanarFaces)
at this link:
http://www.mediafire.com/file/56jgl6gvgzg5a0m/Rev-DiaPlanarFaces.zip/file
the file with the revision
Have a nice day everyone
al

---

Hi Friends
a nice example, at least I think, of a hypothetical and singular
mechanical clock
file at this link :
http://www.mediafire.com/file/4vm71yg0ad0565d/Mechanical_Clock.zip/file
Have a nice day to all
al

---

Hi Friends
a striking effect on surfaces.
the file at this link:
http://www.mediafire.com/file/5elcgg2sgios82d/Louvre_Box.zip/file
Happy weekend to all

al

---

Nice Louver, Speedy.

Your Twist node comes up red ("missing" node).
Replacement with Twist node under Transform menu, in my nodeeditor setup, worked.

- Brian

---

Many thanks, Brian

---

Hi Al,

Your louvred box was inspirational.
I have taken an alternative approach lofting profiles along axes, rotated (rather than twisted) in response to proximity to curve attractor.
It is shown here in an architectural context where it forms facade treatment to fully glazed curtain wall behind.

Keep up the good work
James
Additional images posted:
https://www.instagram.com/nodeology/



NE folder can be found here:
http://moi3d.com/forum/index.php?webtag=MOI&msg=9358.1

Attachments:
louvreCrvAttractor.nod

Image Attachments:
louvreCrvAttractor.jpg  louvreScreen.jpg 

---

Hi All,

My latest NE experiment
James
https://www.instagram.com/nodeology/

NE folder can be found here:
http://moi3d.com/forum/index.php?webtag=MOI&msg=9358.1

Attachments:
hexRelief.nod

Image Attachments:
hexRelief.jpg 

---

What is the last evolution of a complete folder nodeeditor ?

---

Message 7777.1485 was deleted

---

thx but about the last node editor folder "nodeeditor" itself ?
it's the max one on its site ?

Ps very cool page!

---

OK Pilou,

My NE folder can be found here:
http://moi3d.com/forum/index.php?webtag=MOI&msg=9358.1

Hope this works for you
James
https://www.instagram.com/nodeology/

---

Hi,

I just started learning more about node editor and made some progress where i can see how could i use it in my own workflow.

There is a problem i have and i can't solve it no matter what i do. I can't use Macro at all. Whenever i RMB click in the work area and i click on "Macro" i just get Script Error message (image attached). I have seen someone a while ago having a similar issue, tried suggestions but no success.

Does the latest version on node editor support moi3d v3 or is it for v4 only?

I have also tried to copy the nodeeditor folder in "C:\Users\username\AppData\Roaming\Moi" and when i run the command in Moi i just get the blank window.
Now i have it in "C:\Program Files (x86)\MoI 3.0\ui" and it seems like everything works perfectly fine except that Macro problem.


Does anyone know what could be the problem?


Thank you very much.

Image Attachments:
macroError.jpg 

---

Klaudio,

Welcome aboard! You are, I assume the same Klaudio I chatted to on instagram?

>> There is a problem i have and i can't solve it no matter what i do. I can't use Macro at all.

Have you tried replacing the nodeeditor folder in "C:\Users\username\AppData\Roaming\Moi"
with one found here: http://moi3d.com/forum/messages.php?webtag=MOI&msg=9358.1

>> Does the latest version on node editor support moi3d v3 or is it for v4 only

It should work for both, but V4, although technically still in beta stage, is rock solid; so there is no reason not to be using it. I'm on a mac so perhaps its a windows issue.

>> Please keep it up to date whenever you can......

Thank you for your appreciation of "Current NODE EDITOR folder" thread. I wonder if I might ask though if you could delete your post: http://moi3d.com/forum/index.php?webtag=MOI&msg=9358.2 and keep correspondence in this thread, so that the other thread remains a single post of most current file directory.

I hope this helps you get up & running. I look forward to seeing what you get up to.
James

---

Show messages:  1-9  …  1410-1429  1430-1449  1450-1469  1470-1489  1490-1509  1510-1529  1530-1549  …  1850-1859