Nice, very very nice, now I Need the Nodeeditor too. :-)

Where can someone find a step by step tutorial of how to use the node editor? Any link somewhere?

AMAZING JOB!!!!!!!

Period.

:)

P.S....
James, where can I find the retopoSurfs node ?

Thanks.

Hi Marco,

Place the attached file into directory
~/Library/Application Support/Moi/nodeeditor/macros

James

Hi James.

Thanks, but...where is this folder ? "~/Library/Application Support/Moi/nodeeditor/macros"

I have a Windows machine and my folders for Node Editor are :

1) For Moi V4 : C:\Users\<user name>\AppData\Roaming\Moi\<node editor folder>

2) For Moi V3 : C:\Program Files (x86)\MoI 3.0\ui\<node editor folder>

Any help ?

Thanks.

Hi Marco,

Sorry the directory path was for a mac.

So rather it would be (for Moi V4)
C:\Users\<user name>\AppData\Roaming\Moi\nodeeditor\macros\retopoSurfs.nod

If there is not already a "macros" folder, make one.

Let me know if this doesn't work. I don't really know my way around PCs

James

Thanks a lot James!

I've tested in V4 and it works :)

Does it work also with the latest Nodeditor for MoiV3 ?

Thanks.

P.S.

I've made some experiment....what a wonderful Swiss-Army-knife for some situations where I simply want to turn a single surface to ALL QUADS!!!

Thank you very much!!!!

Hi James,
just tried to run nod on half sphere surface and just a tangled result.
Are there any restrictions on what surfaces the nod can be applied to.
Update once surface goes wrong all following selections go wrong as well
even those that previously worked correctly.
Cheers
Barry

Hi Barry

<< Are there any restrictions on what surfaces the nod can be applied to.>>

Yes, it will only work with 4 edged surface patches.

<< just tried to run nod on half sphere surface and just a tangled result.>>

This is a difficult one because you can't start with sphere solid, because it won't work with trimmed surfaces.
Attached is method for retopologizing a 3 edged hemisphere made by networked curves.


James

Hi James,
Ok that’s good will stipulate the 4 edge requirement in my other post.
However the concern I have is once a surface that does not meet that
requirement causes the macro to crash and the following correct
surfaces also crash.It would be good if a reset within the nod was possible.
The only way I see to reset the nod file is to close and reopen Moi ?
Anyway thanks for your help I think your macro is well worth developing.
Only wish I had the knowledge to be more help.
Barry

Hi Barry

Can you send me the .3dm file so that I may reproduce the error
and perhaps find a work around.

Thanks
James

Hi James,
I'm using the file I posted(http://moi3d.com/forum/index.php?webtag=MOI&msg=7777.987)
Just added a sphere and trimmed it on it's seam to make a dome surface and named it S8.
From the photo you can see the tangled result of the dome and when S7 was next applied
you can see it is also wrong.
I noticed the surfaces spike to drawing origin.

Barry

Hi All,

I feel nodeeditor has been neglected, so this weekend I decided I would play around with it.
Below is an unintended result of that play.

The other attachments are also outcomes of the same nod circuit:" surfTria.nod".

Have a great weekend
James

Hi
How it works ?
Thanks

Hi Finema,


>> How it work <<.

I doubt this will be satisfactory, but the short answer is as follows:

Set up nodes to create base surface tesselation of hexagons, each lofted to a centre point to make triangular tiles and flow to target surface.

The underlying hexagonal pattern is variable in row and column , While the triangles are height variable of ctr.

Hope this helps
James

Cool!

Some further development based on previous nod file

Hi James
Can you share the 3dm file and the library used in your nod ?
Thanks a lot