Catenary Script All  1-4  5-13

 From: bemfarmer 30 Aug 2011  (5 of 13)
 4454.5 In reply to 4454.4 Thankyou Michael. More to come, later after work...

 From: bemfarmer 23 Mar 2012  (6 of 13)
 Attached is an unofficial Catenary curve creation script. It works well in the TOP view. Catenary2PtXY is a script which produces a catenary in the xy plane, from two points picked by the user. Gravity is in the negative y direction. In the event that the z coordinates of the two points are not equal, an alert requiring equal z coordinates is given. This script uses the Opalg math, and most of the elbarto code. Nearly all of the MoI Distance script is used to select the two points, and measure the distance between the two points. The user inputs the chain length, which must be greater than the distance between the two points, or a catenary will not form. In the event that a catenary does not form, even though the chain length is greater than the distance between the two points, OR if the catenary is upside down, the Newton-Raphson method has failed, and the user can adjust the GuessRadius parameter, to be smaller or greater than 1.0. For a chain length that is long in relation to the x-axis distance between, try a fractional GuessRadius. For a chain length that is slightly longer than the x-axis distance, try a GuessRadius greater than 1. An ARCH seems to be formed if a negative GuessRadius is used. An explanatory PDF titled "Catenary Suspension from Two Points" is being edited, and may be posted later, if anyone is interested. Edit: 3/23/2012 Replaced Catenary2PtXY with slightly modified htm. Now works with MoIversion 2 (Windows) Do not have a Mac... Still working on a version which will also accept different z coordinate values, by using a coordinate frame... EDITED: 23 Mar 2012 by BEMFARMER Attachments: Image Attachments:

 From: Michael T. (MICTU_UTCIM) 23 Mar 2012  (7 of 13)
 4454.7 In reply to 4454.6 Very cool. Thanks for the great script bemfarmer. Just to clarify, this only works with the Beta V3 version, correct? I tried it with V2 and I get a script error. Michael T. Michael Tuttle a.k.a. mictu http://www.coroflot.com/DesignsByTuttle

 From: bemfarmer 23 Mar 2012  (8 of 13)
 4454.8 In reply to 4454.7 I never tried version 2......should have...

 From: bemfarmer 23 Mar 2012  (9 of 13)
 Edit: 3/23/2012 Replaced Catenary2PtXY with slightly modified htm. Now works with MoI version 2 (Windows) (Had an extraneous line of code in the htm.) Do not have a Macintosh. Perhaps someone will try it out there?

 From: Michael T. (MICTU_UTCIM) 23 Mar 2012  (10 of 13)
 4454.10 In reply to 4454.9 Just downloaded it bemfarmer, I'll give it a spin. Thanks, Michael T. Michael Tuttle a.k.a. mictu http://www.coroflot.com/DesignsByTuttle