>Woooow, these are really awesome tutorials!!! Thanks for doing all that extra effort!
Thanks Chyman, it's fun work.

>I like the color scheme you use for MOI's interface a lot. That's cool! What settings did you change to archive that?
I've been customizing UI's as long as I can remember, and I usually gravitate towards using my custom pen colors of teal, aqua, red and etc.
The setting for the colors are found in the Moi.ini file, and some can be set in MoI's setting dialog.
Many UI elements are .png files that can be tweaked in Paint Shop Pro or Photoshop. Those apps can tell you the RGB numbers to use for any desired color.
(http://moi3d.com/forum/messages.php?webtag=MOI&msg=1521.38)
Have fun with MoI.ini, but save a backup.

Michael, not to make light, but on a serious note:
MoI can be a Godsend for people with disabilities.
1)You only need the use of one hand. There may be pointer control systems out there for others with more impairment.
2)Not too many apps allow you to alter the sizing of UI controls to suit. Especially when your app needs a endless selection of tool buttons, sub-menus and convoluted quadruple key combinations!
MoI's UI interface is simple and customizable to any size. You can even add thickness to the lines and alter the color schemes to be more adaptable to the visually impared.
3) All it's missing is speech and audio ques! ;-)

Thanks Michael! I just had to use ArrayGem yesterday when I suddenly realized that it wasn't some silly rhinestone creator!
I kept wondering "what? ...a tool for decorating 3D Elvis suits?"
ArrayGem could come in hand for many jobs: For one, you could build an old war plane and apply all of the rivet-heads at once.


>Time to load up Jing!!! It would be much better.
I'm going to look into that, Burr! Though, I like to take my sweet time on some projects and end up performing a lot of back-tracking and revisions. But it would be an improvement.

>Maybe you can use these 2 colors scripts for some variations ;)
That's cool Pilou!

Hi Mike,

> 1)You only need the use of one hand. There may be pointer
> control systems out there for others with more impairment.

Yup, I've actually talked to several people who had injured one of their hands or arms, and they definitely appreciated that they could run MoI without needing to have one hand hovering over the keyboard constantly!

That also allows you to adopt other postures like take a drawing tablet into your lap and sit back in your chair.

- Michael

..or modeling while eating a hamburger... ;-)

Hmmm... I wondered if it was possible to blend three surfaces...



I saw Michael's example on how to make the union on an organic looking bicycle frame, where Fillet was used, then a blend.

Here, I blended two separate surfaces to the larger one respectively.
And by trimming away an amount so that there was a separation between the two blend surfaces,
I Blend-ed them together to form a whole. (as is shown on the right)

The blend was not perfect, you could see a nasty crease. Choosing a different tangent method seemed to help.
I have a few more ideas I may try.

...what was that undocumented command for the Surface Curvature Continuity tool again?... lol ;-)


===================================================================

ALSO:

Check out some very interesting solutions in Piter44's thread using Max Smirnov's Sub-D script:

http://moi3d.com/forum/index.php?webtag=MOI&msg=7409.1 (Bifurcated Tube)





http://moi3d.com/forum/index.php?webtag=MOI&msg=6674.51 (scripts)

I've been spending the last week becoming more acquainted with Kerkythea 2008 Echo. A free rendering app.
It's interface is simple enough to understand and it does have a lot of rendering power.

There are many different modes and settings that can make a render go from minutes to days, as I've experienced.



This is another render of the 1930's waffle iron that I exported from MoI during my 30-day Trial period.
The kitchen, including the tiles were created in MoI as well, but the VRay trial I was using would crash from SketchUp trying to process all that I threw into it.
Kerky to the rescue!

The scene was set up in SketchUp, imported to Kerky and a little post was done in Photoshop to add a little natural light spill glare.
There is a kitchen light made from and emissive material, along with GI sunlight and sky to add light through a window area.

The mode I used here seems a little fake in appearance. Some type of raytrace mode that supports caustics.
I prefer the Metropolis Light Transport mode (BiPT) for the most natural indoor look, but that render method was going to take months, to keep it from looking grainy.

This one is still on it's 50th hour of rendering, four times the resolution and has just begun the anti-aliasing phase.
I'm using a P4 dual core at 3 gHz (eww... thought I had more than 1 gig or ram!) with win XP.... slooooooow.

It was fun to work with and I even learned how to add Depth of Field. I'd now like to focus on rendering time efficiency.

Oh yes... when my ship comes in someday and I can finally afford MoI, I plan on kicking a little tail. ;-)

Magic -

" ... I'd now like to focus on rendering time efficiency."

Not to derail into a discussion of rendering programs, but if render time is an issue (50 hours! Yikes!) then give KeyShot a try. It plays well with MoI and it is FAST. A look through their gallery should tell you if it's a fit for the type of work you're doing. It ain't free, but time is money.

Ed Ferguson

<< ...give KeyShot a try.>>

IMO, $2000 for a renderer is ridiculous.

If you have an NVIDIA card, give Octane a shot. It's about $140 and it is super fast.

If you want FREE, then you should try Blender Cycles or LuxRender.

Thanks for the advice guys!

Yikes! KeyShot is nice but mo expensive. :-/

Took a look at some of those renderes... Frankly, LuxRender seems to have my vote, just on it's merit of mastering light transfer itself.
Spooky real...

The main drawback for me with Lux is the lack of a fully functional exporter for SketchUp. Maybe sometime in the future I hope.
I have Blender installed, but it's UI not only frustrates me, it down right makes me angry! ;-)

It seems that everyone has their own preferences, perhaps shaped by modeling platform, price and experience.