does the Hypershot rendering of Kodak is real time or some minutes?

Hey Danny, if you have some time could you show some MoI close up from this 2 parts (especially the A one, looks an interesting shape, but I don't really understand it because of the reflection)

Is it any part that was more complex to build than an other ?



Thanks a lot !

Hi Pilou,

As you apply the materials in Hypershot it renders in realtime so you can see instantly what it will look like.
You then can apply some different settings, like alpha channels etc. and hit the render button which will take minutes to render, most of the shots you see here took under 15min to render and one or two are screen shots only, which are fine for web viewing.

---------

It turned out great. :) How do you like Hypershot, you seem to get good results with it.

Hi PaQ,

>Is it any part that was more complex to build than an other ?

Funny you should ask because the parts A and B that you want a close up of were probably the parts that took the longest time to process, what I mean is that once I executed the Boolean operation I went away, had a coffee and a chat with the wife then come back and do the next Boolean operation.
You will notice with the scriber that there is a fault because I couldn't get the last Boolean to work so there is one twist missing, but for this project I wasn't too fussed.

The trick is with this kind of knurl pattern is to make the crossing Booleans a slightly smaller diameter, it'll will seem that MoI has hung but be patient it will do it, there is some serious number crunching going on there, you'll see what I mean from the close ups.


Cheers

Hi Grendel,

> How do you like Hypershot, you seem to get good results with it.

For the price of the web license and virtually no learning curve it suits me, Hypershot is good for industrial type design objects but if you want something with atmosphere I think I'll have to look at something else for that, something with more control I think.
I've just got into rendering apps seriously in the past 8 months or so, so I'm still learning, I've mentioned this before, Hypershot is a no brainer when it comes to rendering apps.

---------

you have no better time to make just a "line" of Boolean and make some Array Curve? ;)

Hi Danny,

Thanks a lot for the close-up, I knew there was some cool details there, but I didn't expect to see this kind of crazy booelans !!
I hope you'll render some huge shot anytime to capture all this details !

Fantastic work ... again !

I just tried the demo for hypershot. I also brought it from MOI into carrara by OBJ, and imported into a group. Then assigned simple colors but when I export from Carrara to import to Hyper all the pieces are flat black. Do you use quads/tris or nogon out of MOI? Any idea about this?

Hi Grendel,

>....when I export from Carrara to import to Hyper all the pieces are flat black.

Yeah, It happened to me at first, then I tried some different settings in Carrara and found that with the material output options 'None', 'Colours Only' and 'Textures' I think, set it to 'None', yes I know it's strange to apply colours then output it with no colours but for some reason I think it rewrites the object file for Hypershot to recognise the separate objects and then you should be able to see the objects in shades of blue and green.

Could you let us know if this is the case for you ?

Oh, yeah quads/tris


---------
~Danny~

Just to show that some great learning from your work.

Thanks Danny.

Brian

No Probs Brian, that's why we're all here, to learn.

Cheers

Hi Pilou,

>you have no better time to make just a "line" of Boolean and make some Array Curve? ;)

That's how I did that, Curve>sweep (circle)>Array>Boolean but if I tried to Boolean all the Array at once MoI would fail, then found that it could Boolean 3 or 4 of the arrayed sweeps at a time.
Is that what you mean ?

---------

Danny, Grendel

For your material issue, doesnt the SeparateOBJ editor fix that or are there limitations still?

Also Danny,
Sometimes my mind gets stuck. Would you share how you did the threads?

I'v been trying a sweep like this. Is it close?

Danny, that was it, go figure that you would need top specify none ;(P

Hi Burr,

>For your material issue, doesnt the SeparateOBJ editor fix that or are there limitations still?

That's the first thing I tried but the SeparateOBJ tool separates at sharp edges so a solid, say a cube, would end up as 6 separate objects, so you could imagine how many separate 'sheets' I would of ended up with in this model.
Unless I'm doing something wrong ?

>I'v been trying a sweep like this. Is it close?

Yeah, it is close but I find the profile will twist around it self so I used 2 rail helix curves, what I mean is you offset the second helix by the depth of the profile.

While on the subject of modeling threads Michael, in another cad program I use, within the sweep function there is a forced direction option so when you do something like a thread or spring with a non round profile using a single guide rail, you can force the sweep say in the axis direction (z direction) and this will control the twisting nature of the profile, is that something that can be implemented into MoI ?


---------

Burr

If this makes sense--to the question!

It all relates to the size/placement of the shape.
(AND--using the, say, flat setting in the sweep options)

Brian

>>Yeah, it is close but I find the profile will twist around it self so I used 2 rail helix curves, what I mean is you offset the second helix by the depth of the profile.

Could you dumb this down a bit for me? possibly a screen grab of the curves?

If you have time.

Thanks,
Burr

you got me trying this! It works but I may be overcomplicating something.

>>If this makes sense--to the question!

It all relates to the size/placement of the shape.
(AND--using the, say, flat setting in the sweep options)


Thanks B,
This is similar to mine and I'm having some issues with a boolean at the end. :o