I am not sure that is the official one!
It's just a Donwnloader of progs! ;)
https://www.lo4d.com/corp/about

But will be very cool if you can install it!

Hi,

I've uploaded Autodesk 123D_Design_R2.2_WIN64_2.2.14 on Gofile, here's the link :

https://gofile.io/d/w0eOO9

I've intergrated in the archive, the manual and shortcuts guide aswell.

It works perfectly if you launch it offline, if not, you will not be able to exit the program properly unless killing the task.

Cheers

Thank you guys :)

By the way could anyone of u compare Onshape with 123D Design? it terms of lightweightness & filleting ability?

I also faced few problems regarding Uninstallation of Fusion 360 (I know this is not a place to seek help for that ;) but I thought maybe any one of you could help, So, If u think you can help I will tell u what my problem is!)

OnShape is a monster like Fusion 360! ;)
123D is a lighter one !
both can resolve some of complex fillets

Uninstall fusion 360 must be done (in windows) like usual other progs!
Config Panel / Uninstall Progs...

> Uninstall fusion 360 must be done (in windows) like usual other progs!
Config Panel / Uninstall Progs

Yes it should be like what you mentioned above, except the fact that it doesn't work! Windows was not able to uninstall it ;)

So, I did a research and found this:

https://knowledge.autodesk.com/support/fusion-360/troubleshooting/caas/sfdcarticles/sfdcarticles/How-to-do-a-clean-uninstall-of-Autodesk-Fusion-360.html

According to above website :

1-Go to the Start Menu > Control Panel > Uninstall Programs.
2-Select the existing Autodesk Fusion 360 entry from the list and click Uninstall.
-> *Sometimes this step will not work depending on what happened to the installation files. If that is the case move onto the manual deletion steps below)*

In my case this didn't work! So, I went to this link:

https://knowledge.autodesk.com/support/fusion-360/troubleshooting/caas/sfdcarticles/sfdcarticles/How-to-do-an-automatic-Clean-Uninstall-for-Autodesk-Fusion-360.html

and downloaded "Fusion_360_Cleaner.zip for Windows" and then executed it! It seems it was able to remove Fusion 360. But my problem is that when I go to Control Panel\All Control Panel Items\Programs and Features I still see Fusion 360 ( however the icon is not there but it says it has occupied 2.54 GB on my drive!

Edit: I just need a companion program for MOI to do the fillet job! While I am waiting for MOI to improve its filleting abilities :)
So, I am looking for a preferably lightweight and free/open source program. if you have worked with Onshape & 123D Design before which one you suggest?

123 Design will be perfect because it's very easy!
Design Spark Mechanical 5.0 (free) is less easy and export / import with Moi is a little tricky!
OnShape is middle easy and only Online...

YES: it is the official site !

This one yes but... no link to 123D progs! ;)
https://www.autodesk.com/solutions/123d-apps

Which version of 123d design is that? I think it`s the first iteration because later layers were turned off. I can`t find that old version with layers. Do you think that the older version is better than the newer one? I think it won`t try to connect with Autodesk and those layers are useful.

Do you have any opinions about that version from that screenshot?



Cheers!!!

How about the fillet power?

Why not click n the button "?" on the Top right screen ? ;)

This was answer to my question?

Because I don`t have this software only print screen from net :) it`s hard to click anything on the image ;)
I can`t find this particular version. I`ve found others but not this one.

From this "French Site" it's more a beta 123D (6.1) for Fusion 360...
Scroll/Click the Horizontal images : your is N°7 / 9
I believe that you can download it! Will be in English! ;)
Only for Windows! (not tested because i have yet 123DDesign 2.2.14 and Fusion ;)
https://autodesk-123d.fr.softonic.com

Hello to all,

Does anyone have any idea why moi cannot perform fillets on my hexagonal objects while it can perform fillets on pentagonal ones?

Maybe because is like to try to fillet a sphere ?

DRILLBIT -

If I select the solid(s) then I can fillet up to around 0.5. If I select just the outer face I can't get a fillet. Sometimes fillet needs multiple faces to be selected. I suspect it has to do with the smaller angle.

Michael would need to give the technical explanation - I just know what works :)

Ed Ferguson

Hi PILOU,

No! I don't think its the case then why MOI is able to perform fillets on pentagonal objects?

Hi ed!

That works! haha

What a simple and useful trick! thanks :)

Yes, I'd be happy to know the technical explanation (@Michael)

Hi Psygorn,

re:
> Does anyone have any idea why moi cannot perform fillets on my hexagonal objects
> while it can perform fillets on pentagonal ones?

I tested selecting this hexagonal piece:


And then I put a fillet of radius 0.2 on it which seemed to be fine:


I'll need some more details about what is not working over there for you.

- Michael

Hi Ed,

re:
> Sometimes fillet needs multiple faces to be selected. I suspect it has to do with the smaller angle.

When you target only some edges coming out from a shared vertex location instead of all edges it's a much more difficult calculation for the filleter to do because it has to extend and intersect fillet surfaces against each other rather than being able to have the fillets come to a corner junction patch which doesn't need intersections.

- Michael