Nodebundle for playing with nodes
 1-10  …  1371-1390  1391-1410  1411-1430  1431-1450  1451-1470  …  1851-1859
Thread Split: Some posts in this thread have been moved here

Previous
Next
 From:  bemfarmer
7777.1411 
After 2 weeks of intermittent coding, study of many nodes, mostly by Karsten, and hundreds of corrections, a node for LineWeb was created.
There are many comments in the code, which could be removed.

In addition to the LineWeb node, a simple demo node program is attached.
Copy the LineWebNode.js file in the nodeeditor Extensions folder.
This will place the LineWeb node in the Construct2 menu.
(Construct2 could also be edited to include the LineWeb node code.) Maybe Karsten or James will do this, after the node is tested?

Testing has been minimal.
Input of other objectlist types has not be tested, nor is there any code to check for other types of objectlists.

- Brian

EDITED: 23 Mar 2019 by BEMFARMER


  Reply Reply More Options
Post Options
Reply as PM Reply as PM
Print Print
Mark as unread Mark as unread
Relationship Relationship
IP Logged

Previous
Next
 From:  bemfarmer
7777.1412 
For simple curve nodes such as Line, Circle, Star, Polygon, Curve/Interpcurve, ..., wired to an Output node, what color will the curve be drawn in?

If the Output node has "--" set for Style color, the color drawn will be the Style color currently in effect for MoI:
a. when the curve output is Wired to said Output node. And Run.
b. when the curve output is Rewired to said Output node.
c. when the node program is re-Loaded and Run.

If the Output node has a Style color set in it's Info box, that will be the color drawn, at Run, or during Run, over-riding a previously wired MoI Style color.
In the current session, Switching the Output node Style color set in it's Info box back to "--", reverts to the MoI Style color previously in effect, (even if MoI Style was changed, and there was no rewire.) (The previous wired color is "remembered" for the current MoI nodeeditor session.)

- Brian
  Reply Reply More Options
Post Options
Reply as PM Reply as PM
Print Print
Mark as unread Mark as unread
Relationship Relationship
IP Logged

Previous
Next
 From:  bemfarmer
7777.1413 
Normal Distribution, Bell Curve.
- Brian

  Reply Reply More Options
Post Options
Reply as PM Reply as PM
Print Print
Mark as unread Mark as unread
Relationship Relationship
IP Logged

Previous
Next
 From:  bemfarmer
7777.1414 
UnwrapCurve node, with majority of the code from UnwrapCurve script of Michael, made compatible with nodeeditor.

Learned that script (sub) functions are located in nodeeditor basicFunctions.js. LengthSq was not in there,
but magnitude(vec) was, as well as normalizeVec(vec) and scaleVec(vec,factor).

dir.scale( 1.0 / magnitude(dir) ); code did not work properly, (Lines and curves had Unwrap length squared, but circles and stars yielded the correct Unwrap length.)

but, dir = scaleVec( dir,1/magnitude(dir) );, did work properly.

(Limited testing)
There is no code to restrict input to curves...

- Brian

EDITED: 27 Mar 2019 by BEMFARMER

  Reply Reply More Options
Post Options
Reply as PM Reply as PM
Print Print
Mark as unread Mark as unread
Relationship Relationship
IP Logged

Previous
Next
 From:  Frenchy Pilou (PILOU)
7777.1415 
2 Trivial questions just for concept! :)

Does Elephant can call an existing command like the last InsertCircle by Michael ?
http://moi3d.com/forum/messages.php?webtag=MOI&msg=9266.88

If by miracle yes, send it a wished radius value can be possible?

Of course i can make differently even without the InsertCircle (because you must click at each time) ;)
Array on Curve + Boolean Union made that very well! ;)



(about Array on Curve just (re) discovered that you can move the Base's & Offset's Points during the run of it! :)

  Reply Reply More Options
Post Options
Reply as PM Reply as PM
Print Print
Mark as unread Mark as unread
Relationship Relationship
IP Logged

Previous
Next
 From:  Michael Gibson
7777.1416 In reply to 7777.1415 
Hi Pilou,

re:
> Does Elephant can call an existing command like the last InsertCircle by Michael ?

No, not quite exactly - Elephant does not call a "command" in MoI its nodes call MoI's script functions which is also what commands call.

But it is possible to make a node that does the same thing that "InsertCircle" does though, by using the same script that the command uses. Basically it's packaged up differently.

- Michael
  Reply Reply More Options
Post Options
Reply as PM Reply as PM
Print Print
Mark as unread Mark as unread
Relationship Relationship
IP Logged

Previous
Next
 From:  Frenchy Pilou (PILOU)
7777.1417 In reply to 7777.1416 
Thx for explanations! :)
---
Pilou
Is beautiful that please without concept!
My Moi French Site My Gallery My MagicaVoxel Gallery
  Reply Reply More Options
Post Options
Reply as PM Reply as PM
Print Print
Mark as unread Mark as unread
Relationship Relationship
IP Logged

Previous
Next
 From:  Karsten (KMRQUS)
7777.1418 In reply to 7777.1415 
Hello Pilou,

you don't need a special node. You can do it with the known ones.

Have a nice day
Karsten
Attachments:

  Reply Reply More Options
Post Options
Reply as PM Reply as PM
Print Print
Mark as unread Mark as unread
Relationship Relationship
IP Logged

Previous
Next
 From:  Michael Gibson
7777.1419 In reply to 7777.1418 
Oh yeah - InsertCircle doesn't really do very much, just creates a circle and does boolean union. So yeah like Karsten says those things are available in current nodes.

But just in general the node editor doesn't call a particular MoI "command" directly by the command name, it calls script code just like a command calls script code.

- Michael
  Reply Reply More Options
Post Options
Reply as PM Reply as PM
Print Print
Mark as unread Mark as unread
Relationship Relationship
IP Logged

Previous
Next
 From:  Frenchy Pilou (PILOU)
7777.1420 
Sure :)
Now Nodes can take any selection and made an Boolean Union ? I suppose yes :)
---
Pilou
Is beautiful that please without concept!
My Moi French Site My Gallery My MagicaVoxel Gallery
  Reply Reply More Options
Post Options
Reply as PM Reply as PM
Print Print
Mark as unread Mark as unread
Relationship Relationship
IP Logged

Previous
Next
 From:  bemfarmer
7777.1421 
Here is a recreational .nod file to create Mutual Pursuit Curves for your favorite creatures, one of which is located at each corner of a regular polygon.
Each creature "chases" the creature located counterclockwise.

After creating the curves with nodeeditor, switch to regular MoI entry. Then LineWeb can be used on each pair of curves, to create geometric patterns.
Tiling the patterns makes interesting graphics. Planar colors is another option.
(I may do a logarithmic array of points on a line/curve, and/or a logarithmic or geometric series of points for LineWeb.)
The inner ends of the curves can form a mini polygon. The origin is a limit. The curves are some sort of log curves.

- Brian

The main link, which shows several patterns, is: https://www.mathcurve.com/courbes2d.gb/poursuite/poursuitemutuelle.shtml

The equations used were from the linked German site: https://did.mat.uni-bayreuth.de/material/verfolgung/node5.html
Translation can be done in Chrome browser.
Translation can also be done in the Windows 10 Microsoft Edge, but it is necessary to install the free Microsoft Edge translate app. (Fairly easy to do and enable.)
(The various equations on different sites are fairly obtuse to understand.)


EDITED: 30 Mar 2019 by BEMFARMER


  Reply Reply More Options
Post Options
Reply as PM Reply as PM
Print Print
Mark as unread Mark as unread
Relationship Relationship
IP Logged

Previous
Next
 From:  bemfarmer
7777.1422 In reply to 7777.1421 
In a TV show last night, a video was shown of about 20 turkeys, continuously walking and following each other around a circle of radius 8 feet.
There was a dead cat in the middle.
I did not buy the theory that the turkeys were hypnotized.
My explanation is that the turkeys were engaged in Mutual Pursuit. That they liked to follow each other.
The turkeys perception of the danger of the dead cat prevented the collapse of the mutual pursuit curve.
(The turkeys did not recognize that the dead cat was no longer dangerous.)
How the circle began is not clear. :-)

- Brian

EDITED: 30 Mar 2019 by BEMFARMER

  Reply Reply More Options
Post Options
Reply as PM Reply as PM
Print Print
Mark as unread Mark as unread
Relationship Relationship
IP Logged

Previous
Next
 From:  bemfarmer
7777.1423 
Here is a simple .nod program with logarithmic spacing of between 2 and 20 points, on a line from x=1 to x=10. (Slider numbers can be altered.)
Also included are a few demo nodes, Flowing the points to another curve (a longer line in the demo), with Stretch option.

It is also possible to do Geometric spacing, in another node. (Progressive node has geometric progression.)

The fairly simple math equations came from a typewriter era program called Gridder (BSD license), and are explained in Appendix I of the Users Manual.
(There are numerous typo errors in Appendix I, but not too serious. It was fun and only a little awkward to understand and verify the equations, with a few corrections.)
(Source code was not examined.)

https://meshing.lanl.gov/gridder/users_manual.html
https://meshing.lanl.gov/gridder/gridder.html

- Brian

EDITED: 30 Mar 2019 by BEMFARMER


  Reply Reply More Options
Post Options
Reply as PM Reply as PM
Print Print
Mark as unread Mark as unread
Relationship Relationship
IP Logged

Previous
Next
 From:  James (JFH)
7777.1424 In reply to 7777.1411 
Brian,

I have only just now had a chance to look at your new node contributions. I am excited that you have picked up the ball and run with it.

Regarding Lineweb node: I don't know whether you were already aware, but Karsten's mPath-Array node already offers the this functionality. Have a look at nod file below.

mPath-Array also has the advantage of accepting numArray inputs into DivRail, and so eg your Logarithmic distribution may be mapped to any length of curve. (click on the switch widget below)

Your Mutual Pursuit Curves nod files look interesting. I'm going to have a better look.

Keep up the good work
James

James
https://www.instagram.com/nodeology/

EDITED: 14 May 2019 by JFH

Attachments:

  Reply Reply More Options
Post Options
Reply as PM Reply as PM
Print Print
Mark as unread Mark as unread
Relationship Relationship
IP Logged

Previous
Next
 From:  bemfarmer
7777.1425 In reply to 7777.1424 
James, thank you very much for the multiple information. I was not aware of the power of Karsten's mpath-array node.
The DivRail is a powerful feature.
I found that the time spent on the LineWebNode was very educational, even though the node turns out to be superfluous.
I want to try variable spacing, such as the log spacing, with hopf circles, to see if the resulting network has less "wrinkles" in the hopf torus projections.
Also if multiple lobes can be simultaneously created.

Alas, winter "play" season is over, so less time will be available for nodeeditor, MoI, or documentation. :-)

- Brian

Also, graphing a curve in MoI may be useful in finding curve closure "root" values of parameters.

EDITED: 1 Apr 2019 by BEMFARMER

  Reply Reply More Options
Post Options
Reply as PM Reply as PM
Print Print
Mark as unread Mark as unread
Relationship Relationship
IP Logged

Previous
Next
 From:  James (JFH)
7777.1426 In reply to 7777.1425 
Brian, Karsten or any interested coder,

An exceedingly useful node missing from the toolset is a findCenter node,
that works analogous to Osnap rollover "centre".

James
https://www.instagram.com/nodeology/

EDITED: 3 Apr 2019 by JFH

  Reply Reply More Options
Post Options
Reply as PM Reply as PM
Print Print
Mark as unread Mark as unread
Relationship Relationship
IP Logged

Previous
Next
 From:  bemfarmer
7777.1427 In reply to 7777.1426 
Some tentative thoughts:

What kind of center/centre is being sought?

Bounding box center may not find the desired center. Nor CenterAtOrigin script.

Centroid finding may require some integration, or calculations involving many points.

Prior center of mass/ centroid results: https://moi3d.com/forum/index.php?webtag=MOI&msg=9270.16

The area.js script that I have does not work in MoI4Beta.

- Brian
  Reply Reply More Options
Post Options
Reply as PM Reply as PM
Print Print
Mark as unread Mark as unread
Relationship Relationship
IP Logged

Previous
Next
 From:  James (JFH)
7777.1428 In reply to 7777.1427 
Brian,

>> What kind of center/centre is being sought ? <<

The Centre as defined by Object Snap.

Hope this helps,
James
https://www.instagram.com/nodeology/

James
https://www.instagram.com/nodeology/

Attachments:

  Reply Reply More Options
Post Options
Reply as PM Reply as PM
Print Print
Mark as unread Mark as unread
Relationship Relationship
IP Logged

Previous
Next
 From:  Michael Gibson
7777.1429 In reply to 7777.1427 
Re: center - here are some relevant script properties and functions that were added a while ago in V4. These can be called on a curve or a curve segment:

crv.isPlanar - Property that returns true if the curve's control polygon is planar.

crv.planarFrame - Property that returns a coordinate frame with an origin point at the curve's control polygon centroid and a z axis along the plane normal, only valid if crv.isPlanar == true.

crv.isOnPlane( frame ) - Function that returns true if the curve is on the given frame's x/y plane.

crv.isOnParallelPlane( frame ) - Function that returns true if the curve is on a plane parallel to the given frame's x/y plane.

crv.isClosed - Property that returns true if the curve is closed.

crv.isPeriodic - Property that returns true if the curve has periodic ends (overlapping control points at start/end rather than a corner point at the start/end).

crv.isDegenerate - Property that returns true if the curve has a degenerate control polygon with all the points stacked in the same spot.

crv.isLine - Property that returns true if the curve has the shape of a line.

crv.isSimpleLine - Property that returns true if the curve is a simple line segment made up of only 2 control points.

crv.isCircle - Property that returns true if the curve is a circle.

crv.isArc - Property that returns true if the curve is a circular arc.

crv.isEllipse - Property that returns true if the curve is an ellipse (either a full ellipse or an elliptical arc).

crv.conicFrame - Property that returns the coordinate frame of a circle, arc, or ellipse. Only valid if isCircle, isArc, or isEllipse returns true.

crv.conicRadius - Property that returns the radius of a circle, arc or the x-axis radius of an ellipse. Only valid if isCircle, isArc, or isEllipse returns true.

crv.conicRadiusY - Property that returns the y-axis radius of an ellipse. Only valid if isEllipse returns true.

crv.conicEndAngleRadians - Property that returns the end angle in radians of a circular arc. The arc starts at the x-axis of the arc's frame. Only valid if isArc returns true.


- Michael
  Reply Reply More Options
Post Options
Reply as PM Reply as PM
Print Print
Mark as unread Mark as unread
Relationship Relationship
IP Logged

Previous
Next
 From:  James (JFH)
7777.1430 In reply to 7777.1429 
Thank you Michael for the info.
Is there a script property that returns the center point of polygons (regular & nonregular) and ellipses, just as does “Center” Object Snap?

Thank you for your help,
James
https://www.instagram.com/nodeology/

EDITED: 3 Apr 2019 by JFH

  Reply Reply More Options
Post Options
Reply as PM Reply as PM
Print Print
Mark as unread Mark as unread
Relationship Relationship
IP Logged
 

Reply to All Reply to All

 

 
Show messages:  1-10  …  1351-1370  1371-1390  1391-1410  1411-1430  1431-1450  1451-1470  1471-1490  …  1851-1859