Nodebundle for playing with nodes
 1-15  …  1296-1315  1316-1335  1336-1355  1356-1375  1376-1395  …  1856-1859
Thread Split: Some posts in this thread have been moved here

Previous
Next
 From:  Karsten (KMRQUS)
7777.1336 In reply to 7777.1334 
By the way - It was the most difficult node in the extensions I made from scratch. You have to differentiate between open and closed curves, evaluate a tangent to the start points (no API function in V3), adjust a orientation of a frame with it. All points/frames on the curve are depending on the mode - orientated to the curve (used arraycruve). It takes not only a single value for the div - you can also put a numarray with monotonic increasing values to the input - so you get different distances for the points on the curve. Here I had to use the strategy to place them from both sides for performance issues. PLEASE - don't find a bug:-|

p.s.: If you want to see the frames in an pointarray, you can use showFrame. Also useful to understand the working of the Euler-angles.

EDITED: 19 Jan 2019 by KMRQUS

Attachments:

  Reply Reply More Options
Post Options
Reply as PM Reply as PM
Print Print
Mark as unread Mark as unread
Relationship Relationship
IP Logged

Previous
Next
 From:  bemfarmer
7777.1337 In reply to 7777.1336 
Thank you Karsten,
You are very skilled and informed.

- Brian

I'll study more, as time allows. House remodeling is calling...
  Reply Reply More Options
Post Options
Reply as PM Reply as PM
Print Print
Mark as unread Mark as unread
Relationship Relationship
IP Logged

Previous
Next
 From:  James (JFH)
7777.1338 
Hi All,

Here's a rather trivial example of Max's improved Remapper node being used to define tooth profiles of a cog/sprocket.

Requires Max's latest interface.js found here:
http://moi.maxsm.net/files/nodeeditor/interface.js

James
https://www.instagram.com/nodeology/

EDITED: 14 May 2019 by JFH

Attachments:

  Reply Reply More Options
Post Options
Reply as PM Reply as PM
Print Print
Mark as unread Mark as unread
Relationship Relationship
IP Logged

Previous
Next
 From:  bemfarmer
7777.1339 In reply to 7777.1338 
Hi James,
I'm getting an orange flagged output node.
None of the nodes are red

Test outputs are working elsewhere.

?

- Brian
  Reply Reply More Options
Post Options
Reply as PM Reply as PM
Print Print
Mark as unread Mark as unread
Relationship Relationship
IP Logged

Previous
Next
 From:  James (JFH)
7777.1340 In reply to 7777.1339 
Hi Brian

Should have said "

Requires Max's latest interface.js found here:
http://moi.maxsm.net/files/nodeeditor/interface.js

". Does now!

Let me know if that does not fix issue.
James
https://www.instagram.com/nodeology/

EDITED: 28 Jan 2019 by JFH

  Reply Reply More Options
Post Options
Reply as PM Reply as PM
Print Print
Mark as unread Mark as unread
Relationship Relationship
IP Logged

Previous
Next
 From:  bemfarmer
7777.1341 In reply to 7777.1339 
Note:
Loading a node assemblage with an obsolete node, and then saving the node assemblage from the nodeeditor canvas, may result in a node assemblage which will not work, even after the updated interface.js node has been added to the nodeeditor nodes directory.
The defective node (and assemblage) may look exactly like the good node. Re-upload the node assemblage from its original source.

Thank you James.
I had not updated the interface.js on Home computer.
I'd saved your cog node, from the nodeeditor canvas, making my copy defective.
Updated interface.js.
Defective node still would not work.
Downloaded your cog node AGAIN, from your forum post.
Now the cog node works fine.

- Brian
  Reply Reply More Options
Post Options
Reply as PM Reply as PM
Print Print
Mark as unread Mark as unread
Relationship Relationship
IP Logged

Previous
Next
 From:  Karsten (KMRQUS)
7777.1342 In reply to 7777.1341 
Hello Brian,

maybe caused by JSON. If the Infos for the node are not completly availiable while saving?

Have a nice day
Karsten
  Reply Reply More Options
Post Options
Reply as PM Reply as PM
Print Print
Mark as unread Mark as unread
Relationship Relationship
IP Logged

Previous
Next
 From:  bemfarmer
7777.1343 
Circles projected to sphere by stereographic projection are not closed. (Nor for conformal map to torus.)
Maybe an isclosed check, and if so a close command...

- Brian
  Reply Reply More Options
Post Options
Reply as PM Reply as PM
Print Print
Mark as unread Mark as unread
Relationship Relationship
IP Logged

Previous
Next
 From:  bemfarmer
7777.1344 
The node "separateObj" seems to have a bug.
The node is blocking passage of circles and ellipses, which are closed curves, in a demo of ConformalMapT

It was fairly easy to get the conformal mapping of circles and ellipses to be closed.

- Brian
  Reply Reply More Options
Post Options
Reply as PM Reply as PM
Print Print
Mark as unread Mark as unread
Relationship Relationship
IP Logged

Previous
Next
 From:  bemfarmer
7777.1345 In reply to 7777.1344 
The Separate factory only produces output for curves which can be separated.

The separate node needs to be altered, to pass on closed curves which are made up of only one segment, (including elementary circles and ellipses, etc.)
Closed polygons should be separated for the conformal mapping. (and stereo project?)
So test for isClosed, and also check for crv.getSubObjects().length ==1.

Is there a test to tell when a curve can be separated?
EDIT: Michaels previous answer from: https://moi3d.com/forum/index.php?webtag=MOI&msg=8818.8
"The segments of a curve are returned by the getSubObjects() method which is available on every object type in MoI. A curve always has at least one segment. To see if it's made up of multiple segments you could do crv.getSubObjects().length > 1."

- Brian

EDITED: 9 Feb 2019 by BEMFARMER

  Reply Reply More Options
Post Options
Reply as PM Reply as PM
Print Print
Mark as unread Mark as unread
Relationship Relationship
IP Logged

Message 7777.1346 deleted 9 Feb 2019 by BEMFARMER

Previous
Next
 From:  bemfarmer
7777.1347 In reply to 7777.1345 
After study of Karsten and James code from last December, here is my modification of the
"Separate" node. The code belongs in the objects2.js file of nodeeditor.

code:
    function separateObj()
    {
        this.addInput("In", "objectlist");
        this.addOutput("Out", "objectlist");
    }

    separateObj.title = "separateObj";
    separateObj.desc = "separateObj";

    separateObj.prototype.onExecute = function ()
    {
		var inObj = this.getInputData(0, moi.geometryDatabase.createObjectList());
        var out = moi.geometryDatabase.createObjectList();

        if (inObj.length > 0)
		{
            out = factory('separate', inObj); // Segments of Multi Subsegment curves.
        	for ( var i = 0; i < inObj.length; i++)
			{
				if ( inObj.item(i).getSubObjects().length === 1)
					out.addObject(inObj.item(i)); // Single SubSegment curves.
			}
	
		}
        this.setOutputData(0, out);
    }

    LiteGraph.registerNodeType("Objects2/separateObj", separateObj);






I think that the problem is that the Separate factory only works on geometry objects in the geometry database.
Separate will work on the InObj array of objects, as ONE entity, but not on each curve item in the array, (without more programming).
The above code outputs, to out_slot, the results of the Separate factory, consisting of the segments of curves with more than one sub_segment.
Each inObj object in the input slot is then tested to see if it has only one sub_segment, and if so, said curve is added to the output out_slot.
(This likely does change the order of the curves.)

The conformal mapping is now working well with various input curves. I'm back to Normals...
- Brian
  Reply Reply More Options
Post Options
Reply as PM Reply as PM
Print Print
Mark as unread Mark as unread
Relationship Relationship
IP Logged

Previous
Next
 From:  Barry-H
7777.1348 
Hi,
is there a way of producing an isect node or a way of extracting the edges from the surface I have produced using
the intersection node.
Cheers
Barry


Attachments:

  Reply Reply More Options
Post Options
Reply as PM Reply as PM
Print Print
Mark as unread Mark as unread
Relationship Relationship
IP Logged

Previous
Next
 From:  Karsten (KMRQUS)
7777.1349 In reply to 7777.1348 
Hello Barry,

objects2\extractEdges
objects2\intersectObj

Have a nice day
Karsten
  Reply Reply More Options
Post Options
Reply as PM Reply as PM
Print Print
Mark as unread Mark as unread
Relationship Relationship
IP Logged

Previous
Next
 From:  Barry-H
7777.1350 In reply to 7777.1349 
Hi Karsten,
your faster than Usain Bolt.
Many thanks
Barry
  Reply Reply More Options
Post Options
Reply as PM Reply as PM
Print Print
Mark as unread Mark as unread
Relationship Relationship
IP Logged

Previous
Next
 From:  bemfarmer
7777.1351 
One of these days, an updated set of extension nodes, which can be found:-), would be nice.
I'm still doing some very minor "tweeking" on a few nodes...
- Brian
  Reply Reply More Options
Post Options
Reply as PM Reply as PM
Print Print
Mark as unread Mark as unread
Relationship Relationship
IP Logged

Previous
Next
 From:  James (JFH)
7777.1352 
Hi All,

I've done a psy-code-lic little gyro to trip out to.
(with extra degree of freedom to anim below)

Bigger version at https://www.instagram.com/nodeology/

Haves a great weekend
James


EDITED: 14 May 2019 by JFH

Attachments:

  Reply Reply More Options
Post Options
Reply as PM Reply as PM
Print Print
Mark as unread Mark as unread
Relationship Relationship
IP Logged

Previous
Next
 From:  Karsten (KMRQUS)
7777.1353 In reply to 7777.1352 
Hello James,

That's a really cool effect, with only a few nodes - more or less. Good to see you are back!

Have a nice day
Karsten
  Reply Reply More Options
Post Options
Reply as PM Reply as PM
Print Print
Mark as unread Mark as unread
Relationship Relationship
IP Logged

Previous
Next
 From:  bemfarmer
7777.1354 
What I really need is a heated mouse, or a heated mouse box :-)
Maybe a mini heat pad...
- Brian

Maybe the Gyro node could be modified to take as input "Get by Style" node, or similar node?

EDITED: 17 Feb 2019 by BEMFARMER

  Reply Reply More Options
Post Options
Reply as PM Reply as PM
Print Print
Mark as unread Mark as unread
Relationship Relationship
IP Logged

Message 7777.1355 deleted 6 Mar 2019 by JFH
 

Reply to All Reply to All

 

 
Show messages:  1-15  …  1276-1295  1296-1315  1316-1335  1336-1355  1356-1375  1376-1395  1396-1415  …  1856-1859