Hi Pilou,

Yes I understand that part. That model you see is a solid so if for instance I want to chamfer the top edge of the model including around the bore and the slot that becomes very tedious for me as MoI will not let me easily select the edges I want.

Hope somebody can help.

Rgds,

Hi Paul, just one other note - if you want to chamfer all the edges on the top there, there is a shortcut for doing that by selecting the top face instead of the top edges.

When you select a face and then do chamfer or fillet, all the edges that belong to that face will be targeted for the operation.

So in cases like this, that is just one thing you have to pick instead of picking all the edges.

But you'll still want to change that anti-aliasing setting, or update your video driver like I described above so that regular selection works properly. Please let me know if you need more info on that.

- Michael

Hi Michael,

Thanks for the update and links...

>If you go to your video card settings, under Control Panel / Display / Settings / Advanced, you'll probably >see a section there for >anti-aliasing, is it currently set to have anti-aliasing turned on always? If so >change it to say "application controlled", and that will >probably solve the problem.

Super !!! now were talking :-)

Rgds,

Hi Paul, did that fix up the selection problem then?

- Michael

Hi Michael - Yes that did the trick and MoI works as expected now.....and so far my other CAM apps are not effected.

Thanks very much,