Show messages:
1
2-21
22-41
42-61
62-81
82-101
102-121
122-138
From: christian (CHRI)
it is better to turn outside the circle , explanation on the next POST :
il est préférable de tourner en dehors du cercle, explication dans le prochain POST:
Chri
From: christian (CHRI)
Image Attachments:
NO.gif
YES.gif
From: Max Smirnov (SMIRNOV)
v.0.9a (fixed: division by zero bug)
This will be in the next version. Of course there will be degrees instead of cm.
From: Max Smirnov (SMIRNOV)
wastzzz
replace line: arrow = concat ( factory ('planarsrf', arrow), text);
with: arrow = concat (arrow, text);
christian
Pilou wrote about this problem. It has been fixed.
From: Frenchy Pilou (PILOU)
<< Of course there will be degrees instead of cm.
And also i suppose any text you want? (with the help of "|" and "*") ;)
From: Max Smirnov (SMIRNOV)
Pilou, yes.
From: Frenchy Pilou (PILOU)
Another little thing! :)
When you increase the line ( with your option Concat above) you can have some cool forms!
But the position of text is not following! (sure I can move it in a second but when you have 100 dimensions... ;)
Can we have an enter Box of distance text or similar ? (text can be inside or outside in this last case )
From: Max Smirnov (SMIRNOV)
From: Frenchy Pilou (PILOU)
Cool but how it's work ? :)
I see a new Type 6 but...
From: blowlamp
Use Arrow type 6 and press the CTRL key whilst clicking on the corner point.
Martin.
From: Frenchy Pilou (PILOU)
Must be another thing because that dimension length not angle! ;)
Ah I have found! You must disable Units! :)
Ps Does it be possible to dimension a curve ?
(maybe in connexion with CurveLengthBeingDrawn ?
or CurveLength?
script: /* Show CurveLengthBeingDrawn */ try { moi.ui.commandUI.setInterval( 'var crvs = moi.geometryDatabase.getObjects().getCurves(); var len = 0.0; if ( crvs.length > 0 ) { len = crvs.item(crvs.length-1).getLength(); } if ( !window["_crvdistlabel"] ) { document.body.insertAdjacentHTML( "beforeEnd", "
" ); } _crvdistlabel.innerText = len.toFixed(4);', 250 ); } catch(e) {}
script:/* Calculate length of selected curves and copy to the clipboard as text */ var crvs = moi.geometryDatabase.getSelectedObjects().getCurves(); var len = 0.0; for ( var i = 0; i < crvs.length; ++i ) len += crvs.item(i).getLength(); moi.copyTextToClipboard( len );
Something like this but with the Arrowline following the curve! :)
French version! :)
http://moiscript.weebly.com/cotations.html
Pss We can't dimension an arc circle >180° !
From: Yuan
Great job Max, Thanks!
-Yuan
Image Attachments:
Dimensions_01.png
From: Mik (MIKULAS)
Hi Max,
angle measurements is excellent feature!
Thank you very much.
I've adjusted slightly the function of Arrow type 5. In new version the length of line is controlled by text length, see bellow please.
Old version:
New version:
I've increased the Scale value to 100 as well, because 40 was not sufficient for bigger models.
Thanks again for perfect script.
Mik
Attachments:
Dimensions.v.0.95.2015.07.10.zip
Image Attachments:
Arrow type 5 new.gif
Arrow type 5 old.gif
From: christian (CHRI)
Hi Mik
About length of line...
Since version 0.9.2015.07.06 you need to use the new Mode (with CTRL) with arrows 4 and 5
please take a look at the post of Max ( 4 jul 2015 )
same thing with mode 6
clic on the picture below to see my example .
Chri
Image Attachments:
Mik.gif
From: christian (CHRI)
hi
Small change in the script _Dimensions.htm to increase decimal
( SUBSTITUTE 0 BY 2 IN THE SCRIPT )
clic on the picture below to see my example .
Chri
Image Attachments:
1 before.png
2 after.png
3 file.png
From: Mik (MIKULAS)
Hi Chri,
thank you for post.
Length of dimension line in my first version of Arrow type 5 was controlled by distance between "first click" and "second click". No problem with it when you use it for radius length which is larger than text length. The problem appears typically if Scale value is high and radius small, scale value 40 + radius 1 mm for instance, contrariwise with large radius (100 mm) the length of dimension line is 100 mm as well and it's uselessly long. Please see picture "Old version" in my previous post for example.
In new version you can use the maximal Scale value + minimal or large radius and the length of the line will be a bit longer than text length, exactly 2x longer than arrow length :)
Mik
From: Max Smirnov (SMIRNOV)
Hi Mik,
unfortunatelly your last changes broke type 5 in the circular mode. I can't accept it. I think it will be better if you create a fork of my script using your identification instead of continuing version numeration of my script. For example: v.0.95mik.
From: christian (CHRI)
hi MAX
Very great job !
What do you think about this new add :
by picking 3 points and use * comment , draw a comment on the last entitie of a broken line .
Chri
Image Attachments:
ADD COMMENT ON A 3 PICK LINES.gif
From: christian (CHRI)
May be ...
text instead of code
Chri
Image Attachments:
text instead of code.png
From: wastzzz
While this is a very well written and useful script for now, I really hope there will be a real dimension element in the future, something that when exported in dxf can be recognized by other software (such as rhino or AutoCAD). This one is a really good idea about the approach it could have, I like the "what you see is what you get".
M.
Show messages:
1
2-21
22-41
42-61
62-81
82-101
102-121
122-138