MoI discussion forum
MoI discussion forum

Full Version: Testing v3 for vehicle modelling

Show messages:  1-12  …  33-52  53-72  73-92  93-112  113-116

From: Mike K4ICY (MAJIKMIKE)
13 Aug 2012   [#93] In reply to [#92]
Nice and shiny, Martin!

It looks like it could have stealth anti-radar abilities. ;-)
From: TpwUK
13 Aug 2012   [#94] In reply to [#93]
The last few Lamborghini designs have all had that stealth look about them, but their latest has even been inspired by jet design, apparently, but it is a truly stunning piece of automotive design and engineering, see what you think http://www.lamborghini.com/en/models/special-and-limited-editions/aventador-j/overview/

I am still working on the design side of my model at the moment, that body paint is to shiny but I will sort that when it gets to final render, if it ever does - lol.

Martin
From: TpwUK
14 Aug 2012   [#95]
Nearing completion now, well for what I wanted to do. Disc breaks still to model, and a few more fillets and blends. Hope you like it.

Martin

Image Attachments:
untitled.18.jpg  untitled.22.jpg  untitled.23.jpg 


From: TpwUK
16 Aug 2012   [#96]
Discs are now added and reverted to an older wheel - Never modelled a calliper before so this should be interesting, but here's a sample wheel and discs combo. Default settings for OBJ and IGES in the clay renders, and a straight iges import and render. My suggestion for anyone using KeyShot, use iges export from MoI unless you like playing with mesh detail settings ;)

Martin


Image Attachments:
untitled.25.jpg  untitled.28.jpg 


From: Mike K4ICY (MAJIKMIKE)
16 Aug 2012   [#97] In reply to [#96]
Now that's a well-done, high-tech looking tyre!

Great job Martin!
From: TpwUK
16 Aug 2012   [#98] In reply to [#97]
Hi Mike, shame I cant take credit for the modelling, it's the wheel i got from grabcad but hey ho, my wheel really did look kind of tacky so i just swapped this one to see how it looked , the result is shown below ...

Martin

Image Attachments:
untitled.33.jpg 


From: TpwUK
17 Aug 2012   [#99]
Well more progress made, but still not done... As far as I can tell the following external features still need doing;

1. Wiper arm and blade.
2. Door release handles.
3. Lamborghini name tag on the rear.
4. Callipers.
5. Sneaky spot lights that hide behind the front air intake grills.
6. Some more softening of those hard lines.
7. Fuel intake.

If you know of anything else other than the interior stuff give me a heads up, or you could offer comments of course

Martin

Image Attachments:
Reventon-Test-01.35.jpg  Reventon-Test-01.39.jpg  Reventon-Test-01.40.jpg  Reventon-Test-01.43.jpg  Reventon-Test-01.45.jpg 


From: zarkow
18 Aug 2012   [#100]
Very very Nice, it`s a very good Work.
From: TpwUK
18 Aug 2012   [#101]
End of play today, front wings, doors and front have all been softened. The problem with the Hood/Bonnet is the trim line is i the wrong place, it should have been on the next contour up, but then that would have thrown the badge positioning out, so I will settle for where it is this time, I will be coming back to this Lamborghini at some stage, but for now i will plod on and keep testing MoI and KeyShot and working with IGES files. Tomorrow should see the softening of the edges on the rear sides and possibly some more modelling, well see how time pans out.


Glad you like it Zarkow

Martin

Image Attachments:
untitled.50.jpg 


From: TpwUK
21 Aug 2012   [#102]
Still working on this, but so close to finishing it i can almost smell it.It's a shame my 3d skills are not better as this model screams out for an interior too. But two test renders today, one stealthy matt colour and one deep Laguerre finish ...

Martin

Image Attachments:
Reventon-Test-02.68.jpg  Reventon-Test-02.69.jpg 


From: eric (ERICCLOUGH)
21 Aug 2012   [#103] In reply to [#102]
When can I test drive it? Beautiful.
eric
From: Frenchy Pilou (PILOU)
21 Aug 2012   [#104]
Do you know this guy ? see his tuts
http://www.etereaestudios.com/docs_html/nixus_htm/nixus_index.htm
http://www.etereaestudios.com/docs_html/sentinel_htm/sentinel_index.htm


From: TpwUK
21 Aug 2012   [#105] In reply to [#104]
Hi Pilou, thanks for the reply and the link, I have seen this chaps work before but most of his tutorials are in Spanish, but he does do good stuff. I like to read tutorials but prefer to do things my own way, most tutorials I have tried following in the past are for other software, and although their style works for them it's pretty alien to me, so i tend to run into problems and just settle for trying things my way until i get it right. I will at some stage try an old car with plenty of reference pictures of the interior,and then hopefully i will get the hang of the principles and the ratios involved if that makes sense.

All the best

Martin
From: Rich_Art
22 Aug 2012   [#106] In reply to [#104]
That looks great....

Peace,
Rich_Art. ;-)
From: TpwUK
23 Aug 2012   [#107]
Well this is as far as i can go with this until my skills improve, the callipers look yugh so i have angled the renders to disguise them hehehehehe the wiper blade i modelled was terrible and I deleted it away, the little spots behind the grills, i can't be bothered with, they would be easy to do but to be honest I have lost interest in the model for now, and instead I am going to concentrate on doing car parts for the give away content area and for my personal use, hopefully these will develop my skills to a point where i can do an interior on a future project.

Sorry if this leaves you feeling let down, but i am sure many of you will know where i am coming from ...

I missed isocurve when i started this - but v3 beta has it now, along with twist and flow, all we need now is bend. I am glad I found my way to MoI and I have enjoyed this project, now to find an old car design with lots of pictures of the interior. I will still be visiting from time to time, more so when i start designing the decking for the wife's emergency exit.

Martin

Image Attachments:
Reventon-Test-03.71.jpg  Reventon-Test-03.72.jpg  Reventon-Test-03.73.jpg  Reventon-Test-03.74.jpg 


From: Michael Gibson
23 Aug 2012   [#108] In reply to [#107]
Hi Martin, well it looks really great - nice job!

- Michael
From: TpwUK
23 Aug 2012   [#109] In reply to [#108]
Hi Michael - Glad you like it, the next effort will be better .... Don't forget we need a bend tool, please

OBJ is better than IGES for file size, and 3DM format is better than IGES too, so I have learnt some good stuff whilst playing with this project. Will start designing the decking Sept 3 or shortly there after, got to wait for the French doors to be fitted first so i know what ground clearance i will have. That should make for a real world test for MoI and prove to me if it can replace Rhino as my primary modelling tool for landscape design.

Martin
From: Michael Gibson
23 Aug 2012   [#110] In reply to [#109]
Hi Martin,

> Don't forget we need a bend tool, please

That's actually already present in v3 - the Transform > Deform > Flow tool can currently be used to bend objects.

Draw a line down your straight object for the base curve, and then whatever shape you want including an arc or bendy curve or whatever for your target curve and that will generate a bend effect.

See here for some bending examples:

http://moi3d.com/forum/index.php?webtag=MOI&msg=3628.246
http://moi3d.com/forum/index.php?webtag=MOI&msg=5097.2
http://moi3d.com/forum/index.php?webtag=MOI&msg=5130.5

- Michael
From: TpwUK
23 Aug 2012   [#111] In reply to [#110]
Cool beans Michael, if I don't see a click icon/tool then i just assume it's not there, maybe the button should be named as Bend/Flow just to make it clear for people like me :)

Martin
From: Michael Gibson
23 Aug 2012   [#112] In reply to [#111]
Hi Martin, it's tough to put in long names in the UI, there is only a little bit of space for them. But the actual icon itself does show a straight rectangle being deformed to follow a bent path...

Flow can also be used for some other kinds of deformation purposes like applying a flat pattern onto a curved surface, bending is sort of one piece of it.

- Michael

Show messages:  1-12  …  33-52  53-72  73-92  93-112  113-116