Show messages: All
1-6
7-11
From: Michael Gibson
Hi Ray - so here's the way to do a 3 point align.
1 - Place origin point at your first reference point.
2 - Click (click and release the mouse, not drag) on the orientation picker's x axis line. It is now the primary axis which can be oriented in any direction.
3 - Drag on the x axis line and release it on your second reference point.
4 - Drag on the y axis line and release it on your third reference point.
- Michael
From: RayCAD1962 (RAYCAD003)
Hi Michael,
I follow your instructions video and I made the 3D Ball with your help. I am so happy that I made it. I just take 5 minutes to do it.
Yes, the first file that I sent you was mislead measures but I correct them. The one that I send you is correct and good measures.
Thank you for your help and support.
regards,
Ray
Attachments:
3D Done Ball.3dm
From: Michael Gibson
You're welcome Ray, I'm glad that worked for you!
- Michael
From: 大道刀 (SUIYAN)
https://www.bilibili.com/video/BV1Yp421U762/?spm_id_from=333.999.0.0
https://www.bilibili.com/video/BV1Zq4y197ii?p=7&vd_source=913e265b028433d7f4030496da189d83
我做的，关于标准足球建模并上色的最快方法。moi3d的问题是被轮廓边缘穿过的面实际会被分割（rhino也有这个问题），导致这些面不能倒角（fillet）成功。因此应该采用圆形阵列来做。（第二个视频展示了如何通过旋转避开球的轮廓边缘）
Image Attachments:
1.png
2.png
3.png
4.png
From: pafurijaz
This must be a coincidence in time, I did the same thing but without using the script but construction lines this morning.
but the script is useful
</mg>
Show messages: All
1-6
7-11
