Full Version: V5 Wish List

Show messages:  1-17  …  118-137  138-157  158-177  178-197  198-217  218-237  238-257  …  598-601

Hi Psygorn - small bumpy details like the stitching are just in general not a good fit with CAD geometry. It's usually better to construct something that has those kinds of features in a poly modeling program, not in MoI. ZBrush or 3D-Coat might be good candidates.

- Michael

---

Hi PILOU,

I did name Pentagonal faces, So, later I could select them with more ease! But I don't understand what you want me to do now?

> script: /* Select by Length */ var min = 1.0, max = 5.0; var crvs = moi.geometryDatabase.getObjects().getCurves(); for ( var i = 0; i < crvs.length; ++i ) { var crv = crvs.item(i); var len = crv.getLength(); if ( len>= min && len <= max ) { crv.selected = true; } }

What does the above script do? ( I suppose it will select curves with lengths between 1 & 5) but it did not work. And how it is going to make it easier to put stiches in their desired place?

->I have other question now ( Where did you learn to write MOI scripts? How can I learn it?)
How people create plug-ins for MOI? Why plug-ins usually are accompanied by *.htm file? what does this *.htm file do? I thought only *.js file would be enough.

:)

---

Hi Psygorn, the .htm file contains the user interface for a command. When a command is launched, if it has an .htm file that is first loaded into the command UI area of the side pane and then the .js file is executed. There are some commands that don't show any user interface and they can have just a .js file and no separate .htm file.

- Michael

---

Hi Michael,

Ok and tanx. If you could guide me to where I could start learning to create my own plugins that would be awesome! ( Well I know it is not an easy task but I know it would be fun to be able to create scripts or plugins :)

---

Hi Psygorn, re: learning scripting - it's pretty difficult to learn how to do it currently. It's not an area of MoI that is fully developed, documented, and supported as of yet.

The main way people have learned it is by examining existing commands. There is a little bit of information here: http://moi3d.com/wiki/Scripting .

- Michael

---

Tanx Michael

:-)

---

Alas i don't script ...too difficult for my old brain!
I just use some ready made and edit some values inside...

So you can use a certain length for select only diagonal of a faces...so put manually your objects on these faces...

---

Hi Psygorn, re: learning scripting.

To expand upon Michael's comment about using MoI's commands as examples to learn scripting from, open MoI's commands folder and you will find the .htm and .js files for all of MoI's commands. These are an excellent set of examples to study and give you some insight into how to write your own scripts. It does take some time, but I found it to be very helpful.

--Larry

---

Hi PILOU,

Unfortunately I still don't understand what you are trying to say!

I gave a shortcut to the script u posted:

script: /* Select by Length */ var min = 1.0, max = 5.0; var crvs = moi.geometryDatabase.getObjects().getCurves(); for ( var i = 0; i < crvs.length; ++i ) { var crv = crvs.item(i); var len = crv.getLength(); if ( len>= min && len <= max ) { crv.selected = true; } }

It doesn't work! I mean I was not able to select pentagonal face's sides with it! Would you please show me how it is done? using your short Gif videos?

(I have attached a 3D model of a soccer ball) Take a look at the attachment.

Edit:> Alas i don't script ...too difficult for my old brain!
Old is gold! :)

Attachments:
Soccer_Ball_1.3dm

---

Ok, Tanx.

I'll try to check it although I have to confess I am not good at programming at the moment! But I know how fun it would be if one could create his/her own scripts or plugins! :)

By the way is there a thread for it? (Scripting in MOI I mean)

---

Sorry seems it was a glitch when many decimals are input...

the exact value in the diagonal that input was 9.7832259
normally when you input var min = 9.7832259, max = 9.7832259 that should work but here you must input
var min = 9.7832259, max = 9.7832260
Michael will explain what...it's out my old understanding!

Don't select anything
Press Tab or make a shortcut and write the following line

Press Enter
You must have your 2 diagonals selected!
script: /* Select by length */ var min = 9.7832259, max = 9.7832260; var crvs = moi.geometryDatabase.getObjects().getCurves(); for ( var i = 0; i < crvs.length; ++i ) { var crv = crvs.item(i); var len = crv.getLength(); if ( len>= min && len <= max ) { crv.selected = true; } }

I have just entered 2 diagonals....so only 2 diagonals will be selected!


with Vclone by maxSmirnov you can replace a "vector" by anything! :)
And each objects will take the same direction and size than the vector!
http://moi3d.com/forum/index.php?webtag=MOI&msg=6486.1

---

Hi PILOU,

Thank you for your explanations :)

But I don't get it! Why u keep talking about diagonals?

I need to put stitches along these edges. Why should I look for diagonals?

---

Because a diagonal will be considered like a vector by the Max Smirnov Vclone

Like this you will can replace anything you want by anything you want! :)

If you take the yellow edges how you will distinguish black faces and white face they have same length :)

but what is exactly your target ? Points for make what ?

the file that you give me has different surfaces sizes!

if You want make like the "photo"
with my method you have just to draw only 2 faces ( one black, on white)
Draw the vectors and launch the vClone (twice one for each color) ;)

---

Hi PILOU,

if you take a look at the attached photo you will see a soccer ball and close to it there is a curve and 7 ring like objects ( I call these stitches)
Do you know a method with which I could replace all the shared edges between pentagonal faces and hexagonal ones with those stitches?

Take a close look at the black pentagonal face I have already put some stitches along one of its edges as an example so you could see what I mean!

Attachments:
Soccer_Ball_What_I_Want.3dm

---

so many possibilities, Array files circular, vclone, Oriente Line/line (none) etc...
one method

orange tubes are stiches between Black & White faces
green tubes are stiches between white faces !

1 Black face top and 1 black face bottom
1 array circular from Top for 5 black faces, 1 array circular from bottom for 5 black faces

and only one circular for the last white faces with green tubes :)

---

Hi PILOU,

I did use array circular for creation of my soccer ball with stitches, but I would like to learn new (and possibly quicker methods) like vclone, Oriente Line/line (none) etc...

So, I'll check them and come back to you if i faced a problem.

:-)

---

Hello all, I would like to know your opinion.

Would it be a good idea to have such a thing in MOI?



Edit: I think this way users could save short keys and they could have access to a wider range of commands/scripts/plugins.

---

Hi Psygorn, I think that's probably something that I can set up as part of making multiple shortcut keys in sequence work in the future.

- Michael

---

Tanx Michael.

---

Edit Frame behavior request:

Clicking on an Edit Frame handle toggles the round marker to let me know if I'm about to scale from the object's center, or from one side.

To get accurate mouse movements and see the object close up, I often zoom in to a level where the marker is off screen. I know I should look first to see what mode I'm in, but forget most the time.

Is it possible to add some kind of handle indicator, or handle color change, or handle line thickness change to show if I'm about to scale from the side rather than the center when zoomed in?

Ed Ferguson

---

Show messages:  1-17  …  118-137  138-157  158-177  178-197  198-217  218-237  238-257  …  598-601