something easy to modify to change the general shape of the " noix de coco " ;) mixture of 2 lofts and 2 networks

1 - 4 lines to loft on each side give only 2 pieces

2 - select the 2 pieces and copy paste

3 - 4 - in the top view draw a line as closest as possible of the middle of the hull ( to prevent join problem ... it's better to do that )

4 - boolean diff to cut the half hull

5 - mirror to obtain 2 perfectly joined pieces

6 - draw a line as show on the pict

7 - before apply network to cap the hull ... join to verify it is closed curved - separate and rejoin the neccessary parts of the border - be sure to have the 3 parts ( in yellow )

8 ' select the four pieces ( 2 caps and 2 hull ) and join ... it's a solid

9 - with only small modfications of the curves in top or left axis ... it's easy to change the general shape of the boat

and possible to add other curves on Z axe to refine the shape for various borders etc ...